Canik VOID-9 9mm Titanium Suppressor Black HUB Compatible

Canik VOID-9 9mm Titanium Suppressor Black

The Canik VOID-9 is a lightweight, high-performance 9mm suppressor designed and produced in partnership with Otter Creek Labs. Engineered for use across both 9mm handguns and pistol-caliber carbines (PCCs), the VOID-9 combines advanced 3D-printed titanium construction, configurable front-cap performance, and a versatile 1.125x28 rear mounting interface.

At just 7.5 ounces and 6 inches long, the VOID-9 provides a compact, lightweight suppression solution that minimizes additional weight at the muzzle. Its titanium construction makes it particularly well suited for platforms where maintaining balance and maneuverability is important.

Developed with Otter Creek Labs

The VOID-9 was designed and produced through a partnership between Canik and Otter Creek Labs. Its 3D-printed construction allows for advanced internal geometry while maintaining the lightweight characteristics of its titanium structure.

Interchangeable Front Cap System

One of the defining features of the VOID-9 is its interchangeable front cap system. The suppressor can be configured to prioritize maximum sound suppression or lower-back-pressure performance, giving shooters additional flexibility depending on the firearm and intended setup.

This configurable design makes the VOID-9 particularly versatile for shooters who intend to move a suppressor between compatible handgun and PCC platforms.

1.125x28 Rear Mounting Interface

The VOID-9 uses a 1.125x28 rear mounting interface, a mounting pattern commonly associated with pistol and PCC suppressors and sometimes referred to as Alpha or Micro HUB.

Important: The VOID-9 does not use the standard 1.375x24 HUB / Bravo mounting interface found on many rifle suppressors. Standard 1.375x24 HUB mounts will not thread directly into the VOID-9.

For fixed-barrel PCC applications, the VOID-9 can be configured with an appropriate 1.125x28-compatible mounting solution. This includes compatible direct-thread mounts and compatible 9mm 3-lug mounts. The suppressor-side mount must use the correct 1.125x28 thread pattern, and the firearm-side interface must also match the host firearm.

Please Note: Any direct-thread adapter, 3-lug mount, muzzle device, piston, booster component, or other host-specific mounting accessory is not represented as included unless specifically listed with the product. Always verify mount and host compatibility before use.

Key Features

• Designed and produced in partnership with Otter Creek Labs
• Designed for 9mm handguns and PCCs
• 3D-printed suppressor construction
• Lightweight titanium structure
• Only 7.5 oz
• Compact 6" overall length
• 1.375" overall diameter
• Interchangeable front caps
• Configurable for maximum suppression or low-back-pressure performance
• 1.125x28 rear mounting interface
• Compatible with appropriate 1.125x28 pistol and PCC mounting systems
• Can be configured for compatible 9mm 3-lug systems with the proper mount
• Rated for 9mm
• Rated for .300 Blackout subsonic and supersonic ammunition
• Black Cerakote finish

Specifications

Built for Handguns & PCCs

Unlike a suppressor dedicated exclusively to one type of host firearm, the VOID-9 was developed with both handguns and PCCs in mind. Its lightweight titanium construction minimizes additional muzzle weight, while its 1.125x28 rear mounting interface provides multiple configuration options for compatible host platforms.

For PCCs equipped with an appropriate 9mm 3-lug muzzle interface, the VOID-9 can be paired with a compatible 1.125x28 3-lug suppressor mount. Because the VOID-9 does not use standard 1.375x24 HUB threads, be sure to select an Alpha / 1.125x28-pattern 3-lug mount rather than a standard HUB / Bravo mount.

Compact Titanium Construction

Measuring only 6 inches long and weighing approximately 7.5 ounces, the VOID-9 delivers impressive specifications for a versatile 9mm suppressor. The titanium construction helps keep overall weight low while the black Cerakote finish provides a durable exterior and clean appearance.

What's Included

• Canik VOID-9 Suppressor
• Factory-Supplied Components
• Factory Documentation

Important Mounting Notice: The VOID-9 uses a 1.125x28 rear mounting interface. It is not compatible with standard 1.375x24 HUB / Bravo mounts without an appropriate adapter system. When configuring the suppressor for a PCC, direct-thread, 3-lug, or other mounting systems must use the correct suppressor-side interface and be appropriate for the host firearm.

Product Image Notice: Any firearm, optic, mounting adapter, muzzle device, piston, booster, 3-lug mount, or other accessory shown in product images is not included unless specifically listed as included with this product.

Why Choose the Canik VOID-9?

The Canik VOID-9 combines lightweight titanium construction, 3D-printed manufacturing, a versatile 1.125x28 mounting interface, and configurable front-cap performance in a suppressor designed for both handgun and PCC applications. Developed with Otter Creek Labs, its combination of a 6-inch length, 7.5-ounce weight, interchangeable front caps, and multi-platform design makes it an especially versatile addition to Canik's VOID suppressor lineup.